T-E Cooled LaserPorts are available for 5.6 mm and 9.0 mm lasers. Included in the T-E LaserPort are:
AR-coated micro-aspheric lens with 5 axes of adjustment
Thermo-electric Peltier cooler, 100-900 mA typical
Thermistor, 10 K Ohm for 25° C typical
Heat sink and radiator
OFR FiberBench FB-38-1W
Color coded wiring instructions.
OFR does not supply the power supply. However, the LaserPort is pre-wired by OFR. Simply plug in your laser. Instruction for easy collimation alignment are included. Optionally available are AMP 10 pin or Cannon ITT mini 9 pin connectors.
TO3 LaserPorts are available for any TO3 laser. LaserPort mounts onto industry standard TO3 radiator with laser socket plate. Simply attach to your laser/radiator assembly, and
follow easy instructions for collimation alignment. See also page FO-20. In all LaserPorts, the same ultra-fine FiberPort alignment mechanism houses the AR-coated aspheric Lens that produces a nominal 1x2 mm collimated beam. Having x-y-z and F-Q fine controls, the LaserPort is precision aligned to maintain optimum collimation.
OFR will mount and align customer-furnished lasers when requested. However, OFR bears no responsibility for performance of customer-furnished lasers, nor for damage to same while in OFR possession. Please inquire.
PAL-TE-5.6 or 9.0-λ
T-E Cooled LaserPort for 5.6 mm or 9.0 mm laser.
PAL-5.6 or 9.0-λ
Non Cooled LaserPort for 5.6 mm or 9.0 mm laser.
LaserPort for TO3 Laser
NOTE: when ordering, specify wavelength.
Please specify when using Circulaser™